FINE PLASTER

319It is made with the mortar obtained by mixing the sand and binder which passes through a 1 mm elek or defined by the shaft name on the market. Thin plaster is also used to fill gaps and coagulate the surface from the rough liquid. Usually lime mortar or reinforced mortar is used. The thickness is at most 10 mm.

What is ready plaster?
Plaster is a mortar based continuous coating applied to inner and outer wall surfaces and ceilings in certain thickness. In addition to covering the surfaces of the structural elements to which they are applied and showing them regularly, they also have functions such as thermal insulation, sound absorption and protection of the parts they are covered with, therefore the whole structure with atmospheric conditions and rainfall.

Usage areas
In general, it is done to increase the durability of the walls of the walls, to protect against external influences and to obtain smooth planar surfaces.makinali_alci_siva

The flat plaster applied to the surface of the inner and outer walls will be applied with whitewash, paint, wallpaper, ready-to-color plaster or sprayed plaster to help enhance the appearance.

However, the most important factor in satisfying these properties expected from the liquid is the filling of the plaster.
It is also a fact that the plaster of a plaster filled with durability will bear the properties of resistance, impermeability and resistance to external effects.

In addition, it is foreseeed that the binder in the plaster area will be selected in such a way as to provide these properties if it is considered for various purposes such as adherence, easy workability, strength and impermeability and decorative surfaces according to the place to be applied in the plaster.

In recent years, rich designs and new ready-to-use plaster materials are emerging that appeal to different usage purposes. But nowadays, most of the outer surfaces of the walls are flat, scattered, crushed, wiped, combed, marble plaster; The inner surfaces are made of flat, polished, leaf and marble plaster.

Plaster Types
Roughcast
pervitli-sivaThey are obtained by mixing sand with binders passing through a 3 mm sieve with water. Rough plaster is made in two layers. The first layer is thin, but with a high cement ratio and a thickness of 1 – 1, 2 cm for easy adherence of the mortar to the wall surface. The second layer is made of the first layer and has a total thickness of about 2 – 2.5 cm. On the inside walls, lime mortar or reinforced mortar is used. On the outside walls, reinforced mortar is usually used. In these mortars, the amount of cement may vary, depending on weather conditions and humidity.

Fine Plaster
It is made with the mortar obtained by mixing the sand and binder which passes through a 1 mm elek or defined by the shaft name on the market. Thin plaster is also used to fill gaps and coagulate the surface from the rough liquid. Usually lime mortar or reinforced mortar is used. The thickness is at most 10 mm.